Know Your Ring Size

Your Are Here : Home » Know Your Ring Size

KNOW YOUR RING SIZE: (This is an Advertisement)

METHOD 1

1. Print out this page. Please check that the “Fit to Page” or “Scale to Fit” print options are not selected.

2. Cut out your Ring Sizer and make a slot by cutting along the dashed line.

3. With the numbers to the outside, insert the black end through the slot.

4. Place the Ring Sizer over your finger and pull the tab through the slot until it fits comfortably.

5. Read the corresponding size from the scale as it lines up with the edges of the slot.

Create your own Ring Size

METHOD 2

Know your ring size: please follow below given steps:

1. Wrap a piece of string or thread around the base of your finger.

2. Mark the string or thread where two ends touches.

3. Measure the length of the section of string or paper and compare your measurement with this chart to determine your ring size.(This will give you circumference)

4. Below sizes are in (inches & mm both)

Conversion chart for ring sizes

Inside diameter		Inside circumference		Sizes
(in)	(mm)	(in)	(mm)	United States and Canada	United Kingdom, Ireland, Australia and New Zealand	India, China, Japan, South America	Italy, Spain, Netherlands, Switzerland
0.458	11.63	1.44	36.5	0
0.466	11.84	1.46	37.2	¼
0.474	12.04	1.49	37.8	½	A
0.482	12.24	1.51	38.5	¾	A½
0.49	12.45	1.54	39.1	1	B	1
0.498	12.65	1.56	39.7	1¼	B½
0.506	12.85	1.59	40.4	1½	C		0.5
0.514	13.06	1.61	41	1¾	C½		1
0.522	13.26	1.64	41.7	2	D	2	1.75
0.53	13.46	1.67	42.3	2¼	D½		2.25
0.538	13.67	1.69	42.9	2½	E	3	3
0.546	13.87	1.72	43.6	2¾	E½		3.5
0.554	14.07	1.74	44.2	3	F	4	4.25
0.562	14.27	1.77	44.8	3¼	F½	5	4.75
0.57	14.48	1.79	45.5	3½	G		5.5
0.578	14.68	1.82	46.1	3¾	G½	6	6
0.586	14.88	1.84	46.8	4	H	7	6.75
0.594	15.09	1.87	47.4	4¼	H½		7.5
0.602	15.29	1.89	48	4½	I	8	8
0.61	15.49	1.92	48.7	4¾	J		8.75
0.618	15.7	1.94	49.3	5	J½	9	9.25
0.626	15.9	1.97	50	5¼	K		10
0.634	16.1	1.99	50.6	5½	K½	10	10.5
0.642	16.31	2.02	51.2	5¾	L		11.25
0.65	16.51	2.04	51.9	6	L½	11	11.75
0.658	16.71	2.07	52.5	6¼	M	12	12.5
0.666	16.92	2.09	53.1	6½	M½	13	13.25
0.674	17.12	2.12	53.8	6¾	N		13.75
0.682	17.32	2.14	54.4	7	N½	14	14.5
0.69	17.53	2.17	55.1	7¼	O		15
0.698	17.73	2.19	55.7	7½	O½	15	15.75
0.706	17.93	2.22	56.3	7¾	P		16.25
0.714	18.14	2.24	57	8	P½	16	17
0.722	18.34	2.27	57.6	8¼	Q		17.5
0.73	18.54	2.29	58.3	8½	Q½	17	18.25
0.738	18.75	2.32	58.9	8¾	R		19
0.746	18.95	2.34	59.5	9	R½	18	19.5
0.754	19.15	2.37	60.2	9¼	S		20.25
0.762	19.35	2.39	60.8	9½	S½	19	20.75
0.77	19.56	2.42	61.4	9¾	T		21.5
0.778	19.76	2.44	62.1	10	T½	20	22
0.786	19.96	2.47	62.7	10¼	U	21	22.75
0.794	20.17	2.49	63.4	10½	U½	22	23.25
0.802	20.37	2.52	64	10¾	V		24
0.81	20.57	2.54	64.6	11	V½	23	24.75
0.818	20.78	2.57	65.3	11¼	W		25.25
0.826	20.98	2.59	65.9	11½	W½	24	26
0.834	21.18	2.62	66.6	11¾	X		26.5
0.842	21.39	2.65	67.2	12	X½	25	27.25
0.85	21.59	2.67	67.8	12¼	Y		27.75
0.858	21.79	2.7	68.5	12½	Z	26	28.5
0.866	22	2.72	69.1	12¾	Z½		29
0.874	22.2	2.75	69.7	13		27	29.75
0.882	22.4	2.77	70.4	13¼	Z1		30.5
0.89	22.61	2.8	71	13½			31
0.898	22.81	2.82	71.7	13¾	Z2		31.75
0.906	23.01	2.85	72.3	14	Z3		32.25
0.914	23.22	2.87	72.9	14¼			33
0.922	23.42	2.9	73.6	14½	Z4		33.5
0.93	23.62	2.92	74.2	14¾			34.25
0.938	23.83	2.95	74.8	15			34.75
0.946	24.03	2.97	75.5	15¼			35.5
0.954	24.23	3	76.1	15½			36.25
0.962	24.43	3.02	76.8	15¾			36.75
0.97	24.64	3.05	77.4	16			37.5

Call at +91 98997 30158 for any assistance